Installation guide

IN-1
Cisco uBR7100 Series Universal Broadband Router Software Configuration Guide
OL-2238-03
INDEX
A
AutoInstall configuration, basic 2-7
B
Baseline Privacy
configuring
3-23
Border Gateway Protocol 1-6
BPG 1-6
broadband 3-8
cable modem subnet addressing 3-1
Cisco uBR7100 series
Baseline Privacy, configuring
3-23
cable flap list 3-50
cable modem authentication 5-3
cable modem subnet addressing 3-1
cable modulation profiles, configuring 3-41
cable profiles 3-40, 3-41
cable relay agent 3-37
DHCP giaddr 3-37
downstream cable interface, configuring 3-1
downstream interleave depth 3-6
downstream modulation 3-6
integrated TOD server 3-1
managing cable modems 3-46
QoS permission 3-45
QoS profile assignment 3-45
QoS profiles, configuring 3-43
reset cable modem counters 5-9
reset cable modems 5-8
spectrum group characteristics 3-32
spectrum management 3-1
sync message interval, configuring 5-2
troubleshooting 3-50
upstream admission control 3-14
upstream back-off values 3-21
upstream cable interface, configuring 3-9
upstream channel width 3-11
upstream differential encoding 3-16
upstream forward error correction 3-14
upstream frequency adjustment 3-18
upstream input power level 3-13
upstream minislot size 3-15
upstream power adjustment 3-19
upstream rate limiting 3-17
upstream scrambler 3-16
upstream timing adjustment 3-20
spectrum management 3-1
C
cable dhcp-giaddr command 3-37
cable downstream annex command 3-5
cable downstream channel-id command 3-4
cable downstream if-output command 3-2
cable downstream interleave-depth command 3-6
cable downstream modulation command 3-6
cable downstream rate-limit token-bucket command 3-8
cable flap list
clearing
5-41
description 5-31
flap list aging, configuring 5-38
flap list insertion time, configuring 5-39
flap list miss threshold, configuring 5-40
flap list size, configuring 5-40