Specifications

interface cable-modem
Bridging and Routing Features for the Cisco uBR904 Cable Modem 25
interface cable-modem
To specify the cable modem interface on a Cisco uBR904 cable modem, enter the interface
cable-modem command from global configuration mode.
interface cable-modem number
Syntax Description
Default
Disabled
Command Mode
Global configuration
Usage Guidelines
This command first appeared in Cisco IOS Release 11.3 NA.
When this command is entered, the Cisco cable modem switches from global configuration mode to
interface configuration mode.
Example
The following example brings up cable modem interface 0 and displays the available cable-modem
interface configuration commands:
uBR904(config)# interface cable-modem 0
uBR904(config-if)# cable-modem ?
compliant Enter compliant modes for interface
downstream Downstream channel characteristics
fast-search Enable/disable the DS fast search
upstream upstream channel characteristics
uBR904(config-if)#
Related Commands
cable-modem compliant bridge
cable-modem downstream saved channel
cable-modem fast-search
cable-modem upstream preamble qpsk
number The interface number of the cable-modem interface on the rear panel of the cable
modem.