Specifications

Configuration Tasks
12
Cisco IOS Release 12.0(3)T
Verifying Routing
To verify that bridging is not configured, routing is enabled, and that Routing Information Protocol
is configured on the interfaces, enter the show startup-config command:
uBR904# show startup-config
Building configuration...
Current configuration:
!
version 12.0
no service pad
no service password-encryption
service udp-small-servers
service tcp-small-servers
!
hostname ubR904
!
!
ip host sw-lab-fw 4.0.0.1
ip domain-name cisco.com
ip name-server 171.69.209.10
clock timezone EST 2
!
!
interface Ethernet0
ip address 4.0.0.33 255.0.0.0
ip rip send version 2
ip rip receive version 2
no keepalive
!
interface cable-modem0
ip address 172.16.1.42 255.255.0.0
ip rip send version 2
ip rip receive version 2
no keepalive
cable-modem downstream saved channel 699000000 39
cable-modem downstream search-band 88 453000000 855000000 6000000
cable-modem downstream search-band 89 93000000 105000000 6000000
cable-modem downstream search-band 90 111250000 117250000 6000000
cable-modem downstream search-band 91 231012500 327012500 6000000
cable-modem downstream search-band 92 333015000 333015000 6000000
cable-modem downstream search-band 93 339012500 399012500 6000000
cable-modem downstream search-band 94 405000000 447000000 6000000
cable-modem downstream search-band 95 123015000 129015000 6000000
cable-modem downstream search-band 96 135012500 135012500 6000000
cable-modem downstream search-band 97 141000000 171000000 6000000
cable-modem downstream search-band 98 219000000 225000000 6000000
cable-modem downstream search-band 99 177000000 213000000 6000000
cable-modem downstream search-band 100 91000000 860000000
!
router rip
network 4.0.0.0
network 172.16.0.0
!
ip default-gateway 172.16.1.1
ip classless
!
line con 0
line vty 0 4
login
!
end