Specifications

Installing a Port Adapter

PA-H HSSI Port Adapter Installation and Configuration7-4

Figure 7-4 Aligning the Single-Width Port Adapter Between the Slot Guides

Step 7

With the port adapter halfway in the slot, connect all required cables to the port adapter.

Step 8 After connecting all required cables, carefully slide the port adapter all the way into the

slot until the port adapter is seated in the router.

Step 9 After seating the port adapter in the router, slide the locking tab up to the locked position

and tighten the screws. (Figure 7-1 or Figure 7-2 shows the locking tab in the locked

position.)

This completes the procedure for installing a new port adapter in a Cisco 7100 series router. Proceed

to Chapter 8, “Cable Installation and Interface Conﬁguration,” for information on how to conﬁgure

your port adapter.

22132

0 /

XMTRRCVR

RCLK

FERF

AIS OOF LL

Guides