Specifications

CHAPTER
Cisco 7200 Series and the PA-H HSSI Port Adapter 5-1
5
Cisco 7200 Series and the
PA-H HSSI Port Adapter
This chapter provides information on the PA-H HSSI port adapter and its use on Cisco 7200 series
routers. This chapter contains the following sections:
• Installation Overview, page 5-1
• Removing a Port Adapter, page 5-2
• Installing a Port Adapter, page 5-3
Installation Overview
The PA-H is used in the Cisco 7200 series routers (which includes the Cisco 7206 as a router shelf
in a Cisco AS5800 Universal Access Server) and can be installed in any of the available port adapter
slots. Figure 5-1 shows a PA-H installed in port adapter slot 3 of a Cisco 7206.
Note The steps for installing and configuring a port adapter or service adapter in a Cisco 7200
series router and a Cisco 7206 router shelf are the same; therefore, the procedures in this section
apply to the Cisco 7206 router shelf, unless noted otherwise.
For information about the Cisco 7206 as a router shelf in a Cisco AS5800 Universal Access Server,
refer to the Cisco AS5800 Universal Access Server documentation listed in the “Related
Documentation” section on page vi.
Figure 5-1 Cisco 7206 with a PA-H in Port Adapter Slot 3
2
ETHERNET-10BFL
EN
RX
0
1
2
3
4
TX
RX
TX
RX
TX
RX
TX
RX
TX
0
4
1
3
5
6
FAST SERIAL
EN
TD
TC
RD
RC
LB
CD
TD
TC
RD
RC
LB
CD
TD
TC
RD
RC
LB
CD
TD
TC
RD
RC
LB
CD
TOKEN RING
0
1
2
3
Cisco 7200
Series
FAST ETHERNET INPUT/OUTPUT CONTROLLER
ENABLED
PCMCIA
EJECT
SLOT 0
FE
ENABLE
FE LINK
CPU RESET 1O POWER
OK
SLOT 1
FE MII
ENABLED
TD
TC
RD
RC
LB/C
0
HSSI
ENABLED
MII
LINK
RJ45
FAST ETHERNET
0
H7449
PA-H
port
adapter