Specifications

CHAPTER
VIP2 and the PA-H HSSI Port Adapter 3-1
3
VIP2 and the PA-H HSSI Port Adapter
This chapter provides information on the PA-H HSSI port adapter and its use on the VIP2 in
Cisco 7000 series and Cisco 7500 series routers. This chapter contains the following section:
• Installation Overview, page 3-1
Installation Overview
The PA-H is used on the VIP2, and can be installed in either port adapter slot 0 or port adapter slot 1.
Figure 3-1 shows one PA-H Rev. B installed in port adapter slot 0 on a VIP2-15 or VIP2-40.
Figure 3-1 VIP2-15 or VIP2-40 with One PA-H Rev. B in Port Adapter Slot 0
H10421
ENABLED
HSSI
Rev. B
PA-H in port
adapter slot 0
Blank port
adapter
in slot 1
Port adapter
handles not
shown
Bus connector
DRAM
SIMMs
SRAM
DIMM U5
CPU
U6
U2
U4
Boot ROM
TD TC RD RC LB/C
1
TD TC RD RC LB/C
0
1