Specifications

LEDs
PA-H HSSI Port Adapter Installation and Configuration
1-6
Figure 1-8 Port Adapters in the Cisco uBR7200 Series Universal Broadband
Router
—Cisco uBR7246
The PA-H can be installed in port adapter slot 3 in Cisco 7120 series routers, and in port adapter slot
4 in Cisco 7140 series routers. Figure 1-9 shows a Cisco 7140 with a port adapter installed in slot 4.
Figure 1-9 Port Adapters in the Cisco 7100 Series Router—Cisco 7140
LEDs
The PA-H has two rows of five status LEDs, one row of five for each HSSI port on the port adapter
(TD, TC, RD, RC, and LB/C), and one enabled LED for the port adapter. (See Figure 1-10 and
Table 1-1.)
H11323
Cable modem card slot 3
Cable modem card slot 4
Cable modem card slot 5
Cable modem card slot 6
Port adapter slot 0
(I/O controller)
Port adapter slot 1
(blank)
Port adapter slot 2
SLOT 0 SLOT 1
AC OK
DC OK
OTF
AC OK
DC OK
OTF
5
155 - MM
RX
RX
EN
CEL CAR ALM
TX
I
155 - MM
CONS
FE 0 / 0 FE
ACT
0 / 1 AUX
0
2
RX
7140 - 2MM3
RX
EN
CEL CAR ALM
TX
ACT
LNK
0
LNK
1
PWR
SYS
RDY
EN
ERROR
BOOT
RESETSM-EC-DS
18499
Slot 1 Slot 0 Slot 2
Slot 4Slot 5