User guide

Installing and configuring Movi

As part of the Cisco TelePresence Movi Starter Pack – Express Edition solution, a Movi software client

installation pack will be supplied. Movi can be installed by IT administrators, or more typically will be

supplied to end users for them to install.

After Movi has been installed, it must be configured with user credentials and connection details for

the Cisco VCS Expressway Starter Pack:

1. Start Movi.

2. Click Advanced.

3. Configure the fields as follows:

Internal VCS

The DNS name or IP address of the private side of the Cisco VCS.

External VCS

The DNS name or IP address of the public side of the Cisco VCS.

SIP Domain

The SIP Domain should be the same as configured on the Cisco VCS’s

Domains page (VCS Configuration > Protocols > SIP > Domain)

Transport Auto

Cisco VCS Deployment Guide: Cisco VCS Expressway Starter Pack (X5.1) Page 13 of 28