User guide

9
Cisco TelePresence System Codec C90 Physical interface guide
D14644.03 Codec C90 Physical Interface Guide TC4.1, February 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
w ww.cisco.com
CodecC90RearPanel
Audio socketsVideo sockets Network
interface
sockets
Power
socket
Power
switch
COM Port,
Camera
Control
Audio socketsVideo sockets
GPIO and USB
Rear panel sockets
overview
The Codec C90 provides great exibility for
the connection of audio and video equipment.
The illustration below shows the rear panel of
the Codec C90.
Video sockets
The video input sockets comprise:
4xHDMI
4xHD-SDI
2xDVI-I
2xAnalog Component (Y-Pr-Pb)
1xComposite or 1xS-Video(YC)
The video output sockets comprise:
2xHDMI
2xDVI-I
1 Composite
Audio sockets
The audio input sockets comprise:
8xXLR Female - Microphone/Line In
4xRCA - Line In (1 Left, 2 Right, 3 Left, 4
Right)
2xHDMI
The audio output sockets comprise:
2xXLR Male - Line Out
4xRCA - 1 Left (SPDIF), 2 Right, 3 Left
(SPDIF), 4 Right
2xHDMI
Other sockets
The other sockets comprise:
Ethernet 1 and Ethernet 2
COM - Serial data port
Camera control, serial port
Power socket
Grounding - Chassis grounding
Power On/O switch
GPIO–General purpose Input/Output
USB Host*, USB Device*, T Link*
The following pages give a detailed description of the rear panel sockets and connectors.
* For future use
T Link
Inputs Outputs Basic Setup
The main connectors
for basic setup are
highlighted in orange.
1 1
Contents
Contact us
Introduction
The physical interface
Connecting to the codec
The physical interface