User guide

6
Cisco TelePresence System Codec C90 Physical interface guide
D14644.03 Codec C90 Physical Interface Guide TC4.1, February 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
w ww.cisco.com
!
LAN/
Ethernet
Monitor
(Audio from HDMI 1 or
Line Out 1–2)
OPTIONAL:
Loudspeakers
Basic setup when connecting to Codec C90
The illustration shows you the basic setup when connecting the monitor, PC,
camera, microphone, loudspeakers (if applicable), LAN and line voltage to your
codec.
Make sure the codec has been switched o and
disconnected from the line voltage whenever
connecting or disconnecting other equipment.
OPTIONAL:
Dual monitor setup
Connect the second
monitor to HDMI 3
Main camera:
Video from
PrecisionHD 1080p
OPTIONAL:
You may connect additional
microphones
Video
from PC
OPTIONAL:
You may connect a second camera.
(extra camera not included). Extra
camera will require separate power
supply and control cabling. Consult the
documentation supplied with the extra
camera for details.
Main camera:
Camera Control to
PrecisionHD 1080p
Microphone
OPTIONAL:
Audio from PC
Mains
Power Cable
Inputs Outputs Basic Setup
The main connectors
for basic setup are
highlighted in orange.
1 1
Power Switch
First connect the cables,
then turn the codec on.
Contents
Contact us
Introduction
The physical interface
Connecting to the codec
Connecting to the codec