Datasheet

Configuring the Network
CDP Setting
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 86
5
CDP Settings
Field Description
CDP Control whether CDP will run on some, all or none of the
SRP Ethernet interfaces
. CDP per port is the default
setting (recommended).
CDP Timer Specify the interval at which successive CDP packets
can be sent. You can enter a value between 5 to 900
seconds. The default is 60 seconds.
CDP Hold Timer Control whether CDP will run on some, all or none of the
SRP Ethernet interfaces
. Enter a value between 10 to
255 seconds. The default value is 80 seconds.
Interface List Check the enable box to select which interfaces will run
CDP.