Datasheet

Configuring the Network

UPnP

Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 84

STEP 1 .Click Network Setup > IGMP. The IGMP window opens.

STEP 2 To allow multicast traffic through the SRP for your multimedia application devices,

use the default setting, Enabled.

STEP 3 Select the version you want to support, IGMP v1 or IGMP v2. If you are not sure

which version to select, use the default setting, IGMP v2.

STEP 4 Click Submit to save your settings.

UPnP

Use the UPnP page to enable the UPnP protocol. The UPnP (Universal Plug and

Play) protocol allows local devices to discover the SRP to control certain

configurations.

STEP 1 Click Network Setup > UPnP. The UPnP window opens.

STEP 2 To use UPnP, use the default setting, Enabled.

STEP 3 Configure how UPnP can be used with the features described in the UPnP

Settings table.

STEP 4 Click Submit to save your settings.

Field Description

Support IGMP

Version

Select the version you want to use from the drop-down

list. You can choose from IGMP v1 or IGMP v2. If you

are not sure which version to select, keep the default

setting, IGMP v2.

IGMP Proxy

To Enable the IGMP Proxy, select Enabled. This allows

multicast traffic to pass through the SRP for your

multimedia application devices.

Immediate Leave Select Enabled, if you use IPTV applications and want

to allow channel swapping or flipping without lag or

delays. Otherwise, keep the default setting, Disabled.