Datasheet

Setting up the Interfaces of the Services Ready Platforms

Setting up the VLAN Interfaces and LAN Ports

Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 42

Setting up the VLAN Interfaces and LAN Ports

This section describes how to set up the SRP VLAN and LAN ports. It includes the

following sections:

• DHCP Server

• VLAN Settings

• Port Settings

To access these pages click Interface Setup > LAN from the Configuration Utility.

DHCP Server

To configure the SRP as a DHCP server, you must first create a DHCP server by

using the DHCP Server page and then enable it by assigning it to a VLAN interface.

NOTE When creating a DHCP server you must also specify the IP address and mask for

the VLAN interface it is assigned to. If you do not assign a DHCP Server to a VLAN

interface, then the IP addressing options are configured directly through the VLAN

settings.

Use the DHCP Server page to create DHCP lease pools, reserve leases for

specific hosts, define default routing and set DHCP option values.

STEP 1 Click Interface Setup > LAN > DHCP Server. The DHCP Server window opens.

STEP 2 To view the information for a DHCP entry, click one of the items in the DHCP List.

The DHCP information displays in the DHCP Details table.

STEP 3 To add or delete a DHCP entry from the DHCP list, click the Edit (pencil) or Delete

(x) icon.

STEP 4 To create a new DHCP Server Pool, click Add Entry. The DCHP Server window for

the new entry opens.

STEP 5 Under Router IP, enter the DHCP Name and Local IP Address/Subnet Mask.

STEP 6 Configure the DHCP Server Settings as defined in the DHCP Server Settings

table.

STEP 7 Click Submit to save your settings.