Datasheet

Using Services Ready Platform Diagnostics
Traceroute Test
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 211
9
Traceroute Test
Use the Traceroute page to view the route between the SRP and a destination.
STEP 1 Click Diagnostics > Traceroute Test. The Traceroute Test window opens.
STEP 2 Enter the IP or URL address to run the trace route on.
STEP 3 Click Start to Traceroute to start the test. The results appear on the page and are
refreshed every 5 seconds.
STEP 4 Click Close to close the results and display the form.
Detect Active LAN Clients
Use the Detect Active LAN Clients page to perform a search on the active LAN
clients on your SRP.
STEP 1 Click Diagnostics > Detect Active LAN Client(s). The Detect Active LAN Client(s)
window opens.
STEP 2 Choose the LAN interface you want to detect from the down list. For example:
VLAN1.
STEP 3 Choose how long you want to perform this search (5, 10, or 15 seconds).
STEP 4 Click Start to Search to start the test. A new window opens and displays the test
results.