Datasheet

Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 210

Using Services Ready Platform Diagnostics

This chapter describes how to use diagnostic features of the Services Ready

Platforms.

• Ping Test

• Traceroute Test

• Detect Active LAN Clients

To a c c e s s t h e s e p a g e s c l i c k the Diagnostics Tab from the Configuration Utility

menu bar.

Ping Test

Use the Ping Test page to test connectivity between the SRP and a connected

device on the network.

STEP 1 Click Diagnostics > Ping Test. The Ping Test window opens.

STEP 2 Enter the IP address or URL address that you want to ping.

STEP 3 Enter a packet size in bytes. The range is 32 to 65500 bytes.

STEP 4 Choose the number of times to ping from the drop-down list (5, 10, or Unlimited).

STEP 5 Click Start to Ping to start the test. After the test is complete, the test results

appear on the page.

STEP 6 Click Close to close the test results and display the form.