Datasheet

Administration Settings
Remote Management
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 200
8
SNMP Port Descriptions
The following tables list the internal Linux interface labels used by SNMP when
listing interfaces.
Get Community Enter the password that allows read-only access to the
Gateway's SNMP information.
Set Community Enter the password that allows read/write access to the
Gateway's SNMP information.
SRP500 IP Interfaces
br0 WAN Ethernet 1
br
n LAN VLAN n , where n = 1 - 4079
br4080 through br4083 ADSL PVC1 –4
lo Loopback interface. Hosts management
addresses configured in the Configuration Utility
and the internal loopback (127.0.0.1).
ppp10 3G Modem PPP Interface
gre0 through gre9 GRE Tunnel Interface 1–10
ipsec0 through ipsec4 IPSec Tunnel Interface 1–5
ath0 through ath3 Wireless SSID1–4
SRP500 Internal Interfaces
eth0 WAN Ethernet Interface
eth1 Internal connection to LAN switch.
eth1
n Internal sub-interface connection to LAN VLANs.
(Where
n is the VLAN number 1 - 4079.)
SNMP Settings
Field Description