Datasheet

Administration Settings
Web Access Management
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 196
8
Web Access Management
Use the Web Access management page to configure the web access settings and
remote access rules for the SRP.
STEP 1 Click Administration > Web Access Management. The Web Access
Management window opens.
STEP 2 Configure the Remote Access settings as defined in the Web Access
Management Settings table.
STEP 3 Click Submit to save your settings.
Web Access Management Settings
Field Description
Web Access
Web Utility Access Select HTTP and/or HTTPS. For secure Internet access,
select HTTPS.
If you select HTTPS, you must include https in the URL
when you connect to the utility. For example:
https://xxx.xxx.xxx.xxx, where the x's represent the
Gateway's Internet IP address.
Web Utility Access
via Wireless
Allows the administrator to access the web utility from a
local wireless client.
Remote Access
Remote
Management
Allows you to manage your SRP from a remote location
through the Internet.
Web Utility Access Select HTTP or HTTPS. For secure Internet access,
select HTTPS.
For HTTPS, enter https://xxx.xxx.xxx.xxx (the x's
represent the Gateway's Internet IP address) in your
web browser's address field.