Datasheet

Configuring Voice
Configuring Voice Settings
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 125
6
Response Status Code Handling
Voice > SIP > Response Status Code Handling
RTP Parameters
Voice > SIP > RTP Parameters
SIT1 RSC SIP response status code for the appropriate
Special Information Tone (SIT). For example, if you
set the SIT1 RSC to 404, when the user makes a
call and a failure code of 404 is returned, the SIT1
tone is played. Reorder or Busy tone is played by
default for all unsuccessful response status code
for SIT 1 RSC through SIT 4 RSC.
SIT2 RSC SIP response status code to INVITE on which to
play the SIT2 Tone.
SIT3 RSC SIP response status code to INVITE on which to
play the SIT3 Tone.
SIT4 RSC SIP response status code to INVITE on which to
p l a y t h e S I T4 To n e .
Try Backup RSC SIP response code that retries a backup server for
the current request
Retry Reg RSC Interval to wait before the SRP retries registration
after failing during the last registration.
RTP Port Min Minimum port number for RTP transmission and
reception.
The RTP Port Min and RTP Port Max parameters
should define a range that contains at least 4 even
number ports, such as 100 –106.
The default is 16384.
RTP Port Max Maximum port number for RTP transmission and
reception.
The default is 16482.