Datasheet

Configuring Voice
Configuring Voice Settings
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 119
6
System Page
Use the System page to configure settings for your system and network. This
page includes the following sections:
• System Configuration
• Miscellaneous Settings
System Configuration
Voice > System > System Configuration
Miscellaneous Settings
Voice > System > Miscellaneous Settings
Call 1 and 2 Packet Error Number of invalid packets received.
Call 1 and 2 Mapped RTP
Port
The port mapped for Real Time Protocol traffic for
Call 1/2.
Call 1 and 2 Media
Loopback
Media loopback is used to quantitatively and
qualitatively measure the voice quality
experienced by the end user.
Restricted Access
Domains
Feature not currently used by the SRP.
IVR Admin Password Password for the Administrator to manage the
SRP using the built in IVR through a connected
handset. The default is 1234.
IVR User Password Password for the phone user to manage their line
using the built in IVR via their handset. The default
is no password.
Syslog Server Enter the IP address of the syslog server, to which
system messages will be sent.
Debug Server Enter the IP address of the syslog server, to which
system messages will be sent.