Datasheet

Configuring Voice
Configuring Voice Settings
Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 117
6
Line Status
Voice > Info > Line 1 Status (similar information also provided for Line 2)
Hook State Hook state of the FXO port. Lines are either On or
Off.
Last Registration At Last date and time the line was registered.
Message Waiting States are either Yes or No. The value
automatically is set to Yes when a message is
received. You also can clear or set the flag
manually from the user menu.
Last Called Number The last number called from the FXO Line.
Registration State Indicates if the line has registered with the SIP
proxy.
Next Registration In
Number of seconds before the next registration
renewal. Indicates whether you have new voice
mail waiting.
Call Back Active Indicates whether a call back request is in
progress. Options are either Yes or No.
Last Caller Number Number of the last caller.
Mapped SIP Port Port number of the SIP port mapped by NAT.
Call 1 and 2 State Can take one of the following values:
• Idle
• Collecting PSTN Pin
• Invalid PSTN PIN
• PSTN Caller Accepted
• Connected to PSTN
Call 1 and 2 Tone Type of tone used by the call.
Call 1 and 2 Encoder Codec used for encoding.
Call 1 and 2 Decoder Codec used for decoding.
Call 1 and 2 FAX Status of the fax pass-through mode.