User Guide

2
Services Ready Platform SRP 500 Series Administration Guide 15
Getting Started with the Configuration Utility
This chapter describes how to login and use the Services Ready Platform
Configuration Utility.
• Logging In to the Configuration Utility, page 15
• Using the Configuration Utility, page 16
Logging In to the Configuration Utility
Before you begin to use the Configuration Utility, make sure that you have a
computer that meets the following requirement:
• • Adobe Flash Player version 9.0.124 or later. Visit http://get.adobe.com/
flashplayer/ to download and install the latest Adobe Flash Player.
STEP 1 Connect a computer to an available LAN port of your Services Ready Platform.
By default, your PC will become a DHCP client of the Cisco SRP 500 Series
Services Ready Platform and will receive an IP address in the 192.168.15.x range.
STEP 2 Start a web browser. In the Address bar, enter the default IP address of the Cisco
SRP 500 Series Services Ready Platform: http://192.168.15.1.
STEP 3 When the login page appears, enter the username and password to login as the
administrator.
The default username is admin.
The default password is admin.
NOTE Passwords are case sensitive.