Datasheet

Data Sheet
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 6 of 10
Management features
●
Cisco Configuration Assistant
●
Management of LAN switch ports
●
Telnet, Simple Network Management Protocol (SNMPv3), command-line interface,
and HTTP management
●
RADIUS and TACACS+
VLAN support Support for 4 VLANs
Table 3. Cisco IOS Software Features on Cisco 520 Series Secure Router: WLAN Features (Available with
Wireless Option)
Feature Description
WLAN hardware features
●
802.11b/g
●
Automatic rate selection for 802.11b/g
●
Indoor range: 1 Mbps at 320 ft
●
Wireless Ethernet Compatibility Alliance (WECA) interoperability
●
Default antenna gain: 2.2 dBi
WLAN software features
●
Maximize throughput or maximize range option
●
Universal Client Mode (allows radio to connect router to external WLAN network)
●
Wi-Fi Multimedia (WMM) certification
●
Service Set Identification (SSID) globalization
WLAN security features
●
802.1
●
802.11i
●
WPA and AES (WPA2)
●
EAP authentication: Cisco LEAP, PEAP, EAP-TLS, EAP-FAST, EAP-SIM, EAP-
MD5, EAP-TTLS
●
Static and dynamic Wired Equivalent Privacy (WEP)
●
TKIP/Simple Security Network (SSN) encryption
●
MAC authentication/filter
●
User database for survivable local authentication using LEAP and EAP Flexible
Authentication via Secure Tunneling (EAP-FAST)
●
Configurable limit to the number of wireless clients
●
Configurable RADIUS accounting for wireless clients
●
PSK (Pre-Shared Keys) (WPA-SOHO)
SSIDs 10
Wireless VLANs 10
Encrypted wireless VLANs 4
MBSSIDs 2
Table 4. Cisco 520 Series Secure Router Hardware
Feature Description
Default DRAM 128 MB
Maximum DRAM 128 MB
Default flash memory 36 MB
Maximum flash memory 36 MB
LAN switch Managed 4-port 10/100BASE-T with autosensing MDI/MDX (Media Device In/Media
Device Cross Over) for autocrossover
Console port RJ-45
LEDs PPP, VPN, ADSL, WLAN, LAN
External power supply Universal 100 to 240 VAC