User guide

Using Advanced Phone Features

Using the Interactive Voice Response Menu on the Cisco SPA 501G

Cisco Small Business IP Phone SPA 50X User Guide (SPCP) 47

To change a ring tone:

STEP 1 Press the Setup button.

STEP 2 Scroll to Settings and press Select.

STEP 3 Scroll to Ring Type and press Select. A list of available tones appears

STEP 4 Choose the ring tone that you want to change, and press Select.

STEP 5 Scroll through the ring tones. To hear a ring tone, press Play. To choose a ring tone,

press Select.

STEP 6 Press Exit to close the screen.

Using the Interactive Voice Response Menu on the

Cisco SPA 501G

The Cisco SPA 501G provides an interactive voice response menu. You can enter

options and receive information about the phone and its operation.

To access the IVR:

STEP 1 Press the Setup button.

STEP 2 Enter the IVR option by pressing the numbers of the option, then press #. Some

typical options you might use are listed in the following table:

Option Number Action

110 Gives you the IP address of the phone.

140 Gives you the MAC address (hardware address) of the

phone.

150 Gives you the software version.