Specifications

3-5
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 3 Configuring Voice Service and Voicemail
Using the Wizard to Configure ITSP Voice Services and Voicemail
Note Contact the ITSP/VMSP for the correct configuration parameters if a URL is not used for the
voicemail server link.
If you selected Option 2 for Step 7 (see Figure 3-4), the system displays the version of Page 5 shown in
Figure 3-6.
Figure 3-6 Configuring a Third-Party Voicemail Server
Complete the fields on Page 5 as directed by the ITSP.
The following describes the purpose of each parameter on both versions of Page 5.
• Voicemail Proxy—Enter the fully qualified domain name of a SIP outbound proxy server where all
outbound requests are sent as the first hop. This modifies the <Outbound Proxy> parameter.
• Outbound Proxy—Enter the fully qualified domain name of a SIP outbound proxy server where all
outbound requests are sent as the first hop.
• Mailbox Subscribe URL—URL that should receive the SUBSCRIBE messages, so the SPA9000
receives voicemail status notification for all mailboxes on this line. This parameter allows $USER
and $PROXY macros, such as $USER@$PROXY.
• Mailbox Deposit URL—URL that the SPA9000 contacts when clients and external callers need to
deposit voicemail in any of the mailboxes on this line.
• Mailbox Manage URL—URL that the IP telephony contacts when it needs to check voicemail for
any of the mailboxes on this line.
• UserID—Enter the value provided by your ITSP.
• Password—Enter the value provided by your ITSP.
• Display Name—Enter the value provided by your ITSP.
• Auth ID—Enter the SIP authentication ID if this is required by your ITSP.
Step 9 After completing Page 5, click Next.
The system displays the page shown in Figure 3-7 on page 3-6.