Specifications
Table Of Contents
- Linksys SPA9000 Administrator Guide
- Contents
- Preface
- 1
- 2
- 3
- Configuring Voice Service and Voicemail
- Using the Wizard to Configure ITSP Voice Services and Voicemail
- Completing the Voicemail Configuration
- Configuring the SPA400 for PSTN Connectivity or Voicemail
- Configuring a SPA IP Phone for Voice Mail Service
- SPA400 Voicemail Options
- Managing Voicemail
- Configuring Voice Service and Voicemail
- 4
- 5
- 6
- A
- B
- Index
2-1
Linksys SPA9000 Administrator Guide
Document Version 3.01
CHAPTER
2
Getting Started
This chapter provides the information required to implement a SPA9000 system, including making the
required network connections and establishing basic connectivity among the system components. It
includes the following sections:
• Implementing LVS, page 2-1
• Using the Interactive Voice Response Interface, page 2-8
• Initial Setup and Configuration, page 2-12
• Setting the SPA9000 Administrator Account Password, page 2-22
• Using the Administration Web Server, page 2-22
• Advanced Methods of Configuration, page 2-24
• Client Registration, page 2-30
• Troubleshooting and Configuration FAQ, page 2-31
Implementing LVS
This section describes the first steps in implementing a SPA9000 system (LVS). It includes the following
topics:
• Using the SPA9000 and SPA400 as a VoIP PBX System, page 2-2
• Using the LVS as a Key System, page 2-3
• SPA9000 Hardware, page 2-4
• SPA400 Hardware, page 2-6
• Bandwidth Requirements, page 2-6
• Caring for Your Hardware, page 2-7
• Making the Physical Connections, page 2-8