Specifications
Table Of Contents
- Linksys SPA9000 Administrator Guide
- Contents
- Preface
- 1
- 2
- 3
- Configuring Voice Service and Voicemail
- Using the Wizard to Configure ITSP Voice Services and Voicemail
- Completing the Voicemail Configuration
- Configuring the SPA400 for PSTN Connectivity or Voicemail
- Configuring a SPA IP Phone for Voice Mail Service
- SPA400 Voicemail Options
- Managing Voicemail
- Configuring Voice Service and Voicemail
- 4
- 5
- 6
- A
- B
- Index
5-11
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 5 Configuring the LVS Auto-Attendant
Switching Between Alternative AAs Using the IVR
Table 5-3 Parameter Descriptions
Parameter Description
AA Dial Plan 1/2 This describes the dial plan rule that the Auto-Attendant uses in a particular
<form>.
AA Script 1/2/3 There are three parameters for storing Auto-Attendant scripts. One option is to
use these as different treatments for daytime hours, nighttime hours, and
weekends/holidays.
Daytime AA
Nighttime AA
Weekend/Holiday AA
Each parameter controls whether the corresponding Auto-Attendant service is
enabled or disabled. The corresponding IVR code is 79228#
Daytime AA Script
Nighttime AA Script
Weekend/Holiday AA
Script
This parameter specifies which script is used for a particular Auto-Attendant
treatment. The choices are 1 for the AA script 1 setting, 2 for the AA script 2
setting, and 3 for the AA script 3 setting.
DayTime Answer
Delay
NightTime Answer
Delay
Weekend/Holiday
Delay
Each Auto-Attendant service has a corresponding delay setting, which is the
number of seconds you want the Auto-Attendant to wait before answering. By
default, the DayTime Answer Delay setting is 12 seconds. The NightTime and
Weekend/Holiday Answer Delay settings are set to 0 (the Auto-Attendant
answers immediately).