System information

Extension Buttons
Shared FXO Lines
Cisco Unified Communications UC320W Administration Guide 49
6
• The shared line button indicates the status of the line.
- Unlit: Idle.
- Green (steady): Connected to a call on this phone.
- Green (flashing): Holding a call on this phone. To resume the call, press
the phone button.
- Orange (flashing): Ringing.
- Red (steady): Connected to a call on another phone.
- Red (flashing): Holding a call on another phone. To pick up the call,
press the line button.
- Orange (steady): There is an error. Contact your phone administrator for
assistance.
• Shared FXO Line buttons take priority over programmable feature buttons. If
you add a Shared FXO Line after configuring a user's phone buttons, all
buttons will shift down on the phone. If the button limit is exceeded, the
lowest programmable feature button is displaced.
• A Shared FXO Line is not used for station-to-station calling within your
phone system. It is used to for inbound and outbound calls on the specified
FXO trunk.
General Information and Options for Shared Lines
• To simplify the display, only the Label field is available when you first view
this page. After you type a label, additional features are available.
• Label: Enter a description, for your reference in the configuration utility.
After entering a label, either complete the entry or delete it. An incomplete
entry produces an error, indicated by a red X in the navigation tree.
• Create a Shared FXO Line: Click this button to create a new Shared FXO
Line. Then type a Label, enter the settings, and choose a member.
• To remove a Shared FXO line: Click the delete button (X) for the Shared
FXO Line that you want to remove.