User guide

Using Advanced Phone Features
Using the Cisco SPA 525G With Your Bluetooth-Enabled Mobile Phone
Cisco Small Business IP Phone SPA 525G User Guide (SIP) 67
4
Initiating Pairing from the Cisco SPA 525G
STEP 1 Enable Bluetooth as described in the “Enabling Bluetooth (Cisco SPA 525G)” section on
page 65.
STEP 2 Press the Setup button.
STEP 3 Scroll to User Preferences and press Select.
STEP 4 Scroll to Bluetooth Configuration and press Select.
STEP 5 Scroll to Bluetooth Mode and press the Right Arrow key to choose one of the following:
• Handsfree—Your Cisco SPA 525G will operate as a handsfree device with a Bluetooth-
enabled mobile phone.
• Both—Your Cisco SPA 525G will operate with your Bluetooth-enabled mobile phone
or operate with a Bluetooth headset. (See “Connecting Bluetooth Headsets” section on
page 17 for more information on Bluetooth headsets.)
NOTE Your Cisco SPA 525G will connect to only one device at a time (either the
Bluetooth headset or the Bluetooth-enabled mobile phone.)
If multiple Bluetooth devices are in range of the Cisco SPA 525G, the order of devices
in the Bluetooth Configuration > Bluetooth Profiles list is used, and the device with
a higher priority is activated first.
STEP 6 Scroll to Bluetooth Profiles and press the Right Arrow key to enter the profile screen.
STEP 7 Press Scan to scan for your mobile phone.
NOTE Depending on the network environment (for example, the number of Bluetooth devices and
noise level), your Bluetooth headset may not appear on the found devices list. Ensure the
headset is powered on and has Bluetooth activated, and retry the scan.
STEP 8 In the Select a Bluetooth Device to Pair list, select the mobile phone to which you want to
pair and press Connect.
Initiating Pairing from Your Bluetooth-Enabled Mobile Phone
NOTE The procedure varies depending on your phone model. You must turn Bluetooth on, and you
may need to configure a separate setting to make your mobile phone discoverable by other
devices. The following example uses an Apple iPhone.