User guide

Installing Your Phone
Verifying Phone Startup
Cisco Small Business IP Phone SPA 525G User Guide (SIP) 36
2
STEP 6 Use the Up Arrow or Down Arrow key to choose the certificate you want to install (for
example, the root certificate). Press the Select softkey.
STEP 7 Press Save to save the profile.
Verifying Phone Startup
After receiving power and network connectivity, the phone executes a boot-up sequence.
During this sequence, the display shows the Cisco logo. All of the lights on the phone will
flash. After the sequence, which should take about five seconds, the phone will display the
standard menu for the phone. The date, name and number of the phone appear on the top line
of the LCD screen. At the bottom of the LCD screen, softkeys appear over their associated soft
buttons.
If the phone does not display this screen, confirm your installation and connections. If these
are correct, try unplugging the phone and plugging it back in again. If you still don’t see the
display, then contact your Phone Administrator or Internet Telephony Service Provider (ITSP).
Upgrading Your Phone’s Firmware
Your phone ships with pre-installed firmware.
!
CAUTION If you are using your phone with 8x8, do not upgrade your phone’s firmware without consulting
8x8. 8x8 may automatically upgrade your phones without any action on your part necessary.
Your phone ships with pre-installed firmware. If you modify the firmware on your own you
may lose your ability to use your phone in conjunction with 8x8 service. If you are using your
Cisco phone with 8x8, do not upgrade your phone’s firmware without consulting 8x8 Support.
8x8 may automatically upgrade your phones without any action on your part necessary as new
features become available that are compatible with your service.