User guide

Installing Your Phone
Connecting Your Phone to the Computer Network
Cisco Small Business IP Phone SPA 525G User Guide (SIP) 35
2
• WPA/WPA2 Enterprise: You must enter the Cipher Type (TKIP or AES CCMP) and
the EAP Type:
- TTLS: Enter the anonymous ID, choose whether the phone should check for the
server certificate, choose the TTLS Inner Protocol (MSCHV2, MSCHAP, PAP,
CHAP, or MD5), and enter the User ID and password.
- LEAP: Enter the User ID and password.
- TLS: Enter the User ID, choose whether the phone should check for the server
certificate, enter the User ID, and configure the Root certificate and User certificate
(see the “Uploading Security Certificates to the Phone” section on page 35).
STEP 3 To save as a wireless profile, press Save.
Uploading Security Certificates to the Phone
If you are using some types of wireless security (for example, WPA2 Enterprise), you will
need to upload security certificates to the phone. Certificates must be in the following format:
• Root certificate: DER encoded binary x.509 (CER)
• User certificate: Personal Information Exchange (PKCS#12(.PFX))
STEP 1 Connect a USB storage device to your PC.
STEP 2 Create a directory named “ca” on the USB device and copy the certificate files into that
directory.
STEP 3 Remove the USB device from your PC and insert it into the USB slot on the Cisco SPA 525G.
STEP 4 After creating a wireless profile, in the Profile screen, press the Right Arrow key under
Security Mode to set the security options (WPA Enterprise or WPA2 Enterprise).
STEP 5 Scroll to Root Certificate and press the Right Arrow key. All files in the “ca” folder are
displayed.