User guide

Installing Your Phone
Connecting Your Phone to the Computer Network
Cisco Small Business IP Phone SPA 525G User Guide (SIP) 32
2
STEP 5 Scroll to Wi-Fi Configuration and press the Right Arrow key. Choose one of the following
options:
• Wireless Profile—Use this option to add a new wireless profile (either manually or by
scanning for available networks), edit an existing wireless profile, or connect to a
previously configured network. See Manually Adding a Wireless Profile on the Cisco
SPA 525G, page 33.
• Wi-Fi Protected Setup—If your wireless router supports Wi-Fi Protected Setup, use this
method to set up your wireless connection. See Using Wi-Fi Protected Setup with the
Cisco SPA 525G, page 32.
Using Wi-Fi Protected Setup with the Cisco SPA 525G
STEP 1 In the Wireless Configuration window, select Wi-Fi Protected Setup.
STEP 2 Choose one of the following options:
Push Button Configuration:
a. Press the WPS button on your router.
b. On your phone, with Push Button Configuration highlighted, press Select. Your phone
may reboot before the Wi-Fi connection is working.
PIN Configuration
a. After selecting PIN Configuration on your phone, note the PIN displayed.
b. Connect to your router’s web interface using a web browser. Your computer must be
connected to your wireless network. Enter the IP address of the wireless router in the
browser address bar.
c. If required, enter the user name and password. (By default, Linksys routers typically use
“admin” for the user name and “admin” for the password.)
d. View the Wireless tab or window. Locate the Wireless Protected Setup configuration
menu.
e. Enter the PIN into the field that allows you to setup wireless devices using a PIN.
If your router has a WPS button, you can use Wi-Fi Protected Setup to
add a new wireless network profile.