User guide

Installing Your Phone

(Optional) Attaching the Desk Stand

Cisco Small Business IP Phone SPA 525G User Guide (SIP) 24

(Optional) Attaching the Desk Stand

NOTE Do not attach the desk stand if you want to mount the phone to the wall. If you are attaching a

Cisco SPA 500S attendant console attach the console before attaching the desk stand.

STEP 1 Line up the tabs on the desk stand with the slots on the back of the phone.

STEP 2 Slide the bottom tabs into the slots

STEP 3 Lightly press down on the top of the desk stand. It should easily slide into the top slots. Do not

force.

Number Component

1 Auxiliary port. Only for use with the Cisco SPA 500S attendant console (not

currently supported by 8x8).

2 Power port. Insert the power adapter plug into this port.

3 Additional Ethernet port. Connect an Ethernet cable to this port to provide network

connectivity to a PC. (This port cannot be used when the phone is connected to the

network via the built-in Wireless-G client.)

4 Switch (Ethernet) port. Connect the network cable to this port.

5 Phone cord slot. Insert one end of the phone cord into this slot and the other into the

jack at the bottom of the phone handset.

6 USB port. For use with an external USB memory device (optional). You can also use

the USB port on the Cisco SPA 525G model to charge a device such as a Bluetooth-

enabled mobile phone if your phone has a mini-USB port.