Manual

Using the Cisco SPA 500S Attendant Console
Monitoring the Cisco SPA 500S
Cisco Small Business IP Phone SPA 525G/SPA 525G2 User Guide (SIP) 112
6
- Orange (blinking): The line is not configured properly.
- Off: The line is not configured.
• Transfer a call by pressing the line button on the Cisco SPA 500S when an
incoming call is ringing.
• Dial a configured extension by pressing the green line button on the Cisco
SPA 500S.
• Pick up a call ringing at the extension by pressing the flashing red line
button.
Monitoring the Cisco SPA 500S
To view the status of the Cisco SPA 500S, perform the following steps:
STEP 1 Press the Setup button.
STEP 2 Scroll to Status and press Select.
STEP 3 Scroll to Peripheral Status and press Select.
STEP 4 The status is shown in the “Att Cons” fields.