User guide

Getting Started

Entering Numbers and Text in Fields

Cisco Small Business SPA525G and SPA525G2 SPCP IP Phones User Guide 13

NOTE Menus and options can change depending on the software release and what is

allowed by your phone system administrator.

Using the Navigation Button

Use the navigation button to scroll up or down highlighting the desired menu item,

and then press Select or the center Select navigation button to choose the

highlighted item.

Entering Numbers and Text in Fields

Some fields on the IP phones require you to enter numbers and text by using the

keypad or softkey buttons. In general, the following guidelines apply:

• Use the keypad to enter numbers and characters, pressing the key multiple

times to select the correct number or letter.

• Press the number key multiple times to move to a different letter under that

number. (For example, to enter “Mary,” you would press 6 five times rapidly

and then pause (for M); press 2 and then pause (for a), press 7 three times

rapidly (for r), then press 9 three times rapidly (for y).

Available characters are shown in the following table:

Key Character Set

1 1 / : \ , ! ; $ ^ |