User guide

Using the Cisco SPA500S Attendant Console
Connecting the Cisco SPA500S Attendant Console to the IP Phone
Cisco Small Business IP Phone SPA 50X User Guide (SPCP) 47
5
STEP 3 Insert the pegs on the attachment arm into the peg holes on the Cisco SPA500S.
STEP 4 Using the attachment arm screw, secure the attachment arm to the first Cisco
SPA500S.
STEP 5 Insert the pegs on the attachment arm into the peg holes on the Cisco SPA500S.
STEP 6 Using the attachment arm screw, secure the attachment arm to the second Cisco
SPA500S.
!
CAUTION Do not plug a telephone line cord into the AUX port. Use only the auxiliary cable
provided with the Cisco SPA500S.
STEP 7 Locate the AUX OUT port on the back of the first Cisco SPA500S. Connect one
end of the auxiliary cable to this port.
STEP 8 Locate the AUX IN port on the back of the second Cisco SPA500S. Connect the
other end of the auxiliary cable to this port.
STEP 9 Route the auxiliary cable inside the cable slot. The Cisco SPA500S is powered by
the auxiliary cable with the IP phone; no additional power source is required.