User guide

Using the Cisco SPA500S Attendant Console
Connecting the Cisco SPA500S Attendant Console to the IP Phone
Cisco Small Business IP Phone SPA 50X User Guide (SPCP) 45
5
!
CAUTION Do not plug a telephone line cord into the AUX port. Use only the auxiliary cable
provided with the Cisco SPA500S.
STEP 8
Locate the AUX IN port on the back of the Cisco SPA500S. Connect one end of the
auxiliary cable to this port.
STEP 9 Locate the AUX port on the back of the IP phone. Connect the other end of the
auxiliary cable to this port. The Cisco SPA500S is powered by the auxiliary cable
with the IP phone; no additional power source is required.
STEP 10 Route the auxiliary cable inside the cable slot of the Cisco SPA500S.
STEP 11 Attach the appropriate desktop stand to each unit.