User guide

!
"#$%!&'()$!*+%!,(#-+!./0&1!./2&!34)!./5&!! ! ! !
5!
You can also access Do Not Disturb by performing the following st ep s :
STEP 1 Press the Setup button and s e l e ct Preferences > Do Not D i s t u r b .
STEP 2 Press the ed i t so ft k e y .
STEP 3 Press y/n to choose y , then press ok .
STEP 4 Press sa v e .
Deactivating Do Not Disturb
Using the -dnd so ftk e y :
To deact i v a t e Do Not Disturb , press the -dnd softk e y .
Using the Setup button:
You can also deactivate Do Not Disturb by pressing the Setup button and selecting
Preferences > Do Not D i s t u r b .
Parking a Call
You can “park ” a call on a designated line so that another person in your c ompan y can pick up the call.
The call is active until it is “unpark e d ” or the caller hangs up.
To park a c a ll :
STEP 1 While on an active call, press the park so ft k e y .
STEP 2 Enter a number to identify the park line and press di al . The “park line numb e r ” does not
correspond with an actual phone extension numb e r , and you can pick an y easily-
remembered number (for example, 1 00) . The call is then parked on that line, and the caller
hears “ o n ho ld ” music or me ss a g es .
STEP 3 You or another person must then “unpark ” the call.
To unpark a call, you can either use the unpark softkey (if you know the park line numb e r) , or view a list
of parked calls and unpark it from the list .
T o unpark if you know the park line numb e r :
STEP 1 Press the unpark so ft k e y .
STEP 2 Enter the number of the park line (for example, the number that was
entered in Step 2 of “parking a call.”)
STEP 3 Press dial . The call is picked up on your phone.
To view a list of parked calls (and unpark from the list) :
STEP 1 Press the Setup but t on .
STEP 2 Select Call Park S t a t u s .
STEP 3 Choose the parked call you want to r e t r i e v e and press un park .
Placing a Three-Way Conference Call
You can perform c o n f erenc e calls by :
• calling both numbers and pressing the conf so ft k e y
• conferencing an active and held call using the confLX softkey
To initiate a conference ca ll:
STEP 1 Press the conf softkey during an active call. The first call is placed on hold, a second
line i s op ened , and you hear a dial t o ne.
STEP 2 Dial the second p e rs on ʼ s telephone numb e r .
STEP 3 Press the conf softkey again . All three parties are connected in the c o nf erenc e call.
When you hang up, the other two parties are dis c onne ct e d .