System information

Configuring the Voice Settings
Line1 Settings (PHONE Port)
Cisco SPA232D Administration Guide 99
4
Line 1 Settings (PHONE Port)
Use the Voice > Line 1 page to configure the settings for calls through the PHONE
port.
To open this page: Click Voice on the menu bar, and then click Line 1 in the
navigation tree. Enter the settings as described below. After making changes, click
Submit to save your settings, or click Cancel to redisplay the page with the saved
settings.
NOTE In a configuration profile, the FXS parameters must be appended with the
appropriate numeral (for example, [1] or [2]) to identify the port to which the setting
applies.
Line Enable
Caller ID FSK
Standard
The ATA supports bell 202 and v.23 standards for caller ID
generation.
Default setting: bell 202
Feature Invocation
Method
Select the method you want to use, Default or Sweden
default.
Default setting: Default
Field Description
Field Description
Line Enable To enable this line for service, select yes. Otherwise,
select no.
Default setting: yes