System information

Configuring the Voice Settings

DECT User

Cisco SPA232D Administration Guide 167

Handset 1

Field Description

Outgoing Lines A comma-separated list of the index numbers (1~10) for

the lines that are available from this handset for an

outgoing call. These lines will be listed on the phone

screen when the user displays the call options or holds

down the green call button.

Example: 1,2,8

In this example, a user can select DECT line 1, 2, or 8 for an

outbound call.

Default setting: 1

Note: You also can choose these lines from the DECT

Handset Outgoing Line Selection section of the Quick

Setup page.

Failover When this feature is enabled and a call fails through the

selected line, the ATA automatically attempts to place the

call over another enabled DECT line. Select yes to enable

this feature or select no to disable it.

Default setting: no

Deregister To deregister a handset, select yes. After you submit the

settings and the voice module reboots, then the handset is

deregistered. At that point, this parameter is reset to the

default value.

Default setting: no

Bound IPEI Enter the device’s IPEI number (a unique hardware

identifier comparable to a MAC address) if you want to

bind this device to the specified handset ID, such as

Handset 3. The IPEI can be found in the Settings > Phone

Info menu on the handset.

Default setting: blank