System information

Configuring the Voice Settings

DECT Line 1 - DECT Line 10

Cisco SPA232D Administration Guide 146

PSTN Ring Thru Line 1 Ring Settings

DECT Line 1 - DECT Line 10

Use the Voice > DECT Line 1~DECT Line 10 pages to configure the settings for

calls using Cisco SPA302D handsets.

To open this page: Click Voice on the menu bar, and then click DECT Line 1~10 in

the navigation tree. Enter the settings as described below. After making changes,

click Submit to save your settings, or click Cancel to redisplay the page with the

saved settings.

General

Streaming Audio Server (SAS)

Field Description

Default Ring The default ring to be used to ring through Line 1. Choose

from {1,2,3,4,5,6,7,8,Follow Line Cfg}. If Follow Line Cfg is

selected, the ring is determined by the distinctive ring

settings for Line 1. The ring patterns are configured on the

Voice > Regional page. For more information, see

Distinctive Ring Patterns, page 85.

Default setting: 2

Field Description

Line Enable To enable this line for service, select yes. Otherwise,

select no.

Default setting: yes

Field Description

SAS Enable To enable the use of the line as a streaming audio source,

select yes. Otherwise, select no. If enabled, the line cannot

be used for outgoing calls. Instead, it auto-answers

incoming calls and streams audio RTP packets to the

caller.

Default setting: no