System information

Configuring the Voice Settings

Line1 Settings (PHONE Port)

Cisco SPA232D Administration Guide 116

Dial Plan

The default dial plan script for the line is as follows: (*xx|[3469]11|0|00|[2-

9]xxxxxx|1xxx[2-9]xxxxxx|xxxxxxxxxxxx.)

Each parameter is separated by a semi-colon (;)

Example 1:

*1xxxxxxxxxx<:@fwdnat.pulver.com:5082;uid=jsmith;pwd=xy z

Example 2:

*1xxxxxxxxxx<:@fwd.pulver.com;nat;uid=jsmith;pwd=xyz

The syntax for a dial plan expression is described in the table below.

Symmetric RTP Enable symmetric RTP operation. If enabled, the ATA

sends RTP packets to the source address and port of the

last received valid inbound RTP packet. If disabled (or

before the first RTP packet arrives) the ATA sends RTP to

the destination as indicated in the inbound SDP.

Default setting: no

Fax T38 Return to

Voice

When this feature is enabled, upon completion of the fax

image transfer, the connection remains established and

reverts to a voice call using the previously designated

codec. Select yes to enable this feature, or select no to

disable it.

Default setting: no

Dial Plan Entry Functionality

*xx Allow arbitrary 2 digit star code

[3469]11 Allow x11 sequences

0Operator

00 Int’l Operator

[2-9]xxxxxx US local number

1xxx[2-9]xxxxxx US 1 + 10-digit long distance number

xxxxxxxxxxxx. Everything else

Field Description