System information

Configuring the Voice Settings
Line1 Settings (PHONE Port)
Cisco SPA232D Administration Guide 112
4
Audio Configuration
Feature Dial Serv Enable Feature Dial Service. See the Feature Dial Services
Codes parameter For more information.
Default setting: yes
Service
Announcement
Serv
Enable Service Announcement Service.
Default setting: no
Reuse CID
Number As Name
Use the Caller ID number as the caller name.
Default settings: yes
Field Description
Preferred Codec,
Second Preferred
Codec, Third
Preferred Codec
Up to three codecs to be used for all calls from this
handset, listed order of preference. The actual codec
used in a call still depends on the outcome of the codec
negotiation protocol. Select one of the following: G711u,
G711a, G726-32, G729a, or G722.
Default setting for Preferred Codec: G711u
Default setting for Second and Third Preferred Codec:
Unspecified
Use Pref Codec
Only
To use only the preferred codec for all calls, select yes.
(The call fails if the far end does not support this codec.)
Otherwise, select no.
Default setting: yes
Use Remote Pref
Codec
To use the preferred codec specified by the remote peer,
select yes. Otherwise, select no.
Default setting:
Codec Negotiation Specify the codecs for codec negotiation: Default or List
All.
Default setting: Default
G729a Enable To enable the use of the G.729a codec at 8 kbps, select
yes. Otherwise, select no.
Default setting: yes
Field Description