Datasheet

© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 5 of 8
Description Specification
VoIP to PSTN:
●
VoIP-to-PSTN gateway enable and disable
●
VoIP caller authentication method (None, PIN, and HTTP digest)
●
VoIP PIN maximum retry setting
●
One-stage dialing enable and disable
●
VoIP caller ID pattern matching
●
VoIP access-allowed caller list (no further authentication)
●
VoIP caller PIN and associated dial plan
PSTN to VoIP:
●
PSTN-to-VoIP gateway enable and disable
●
VoIP caller authentication method (None, PIN, and HTTP digest)
●
Ring through to FXS enable and disable
●
Ring-through tone: Configurable
●
Caller ID (Bellcore Type 1) for VoIP service access
●
Caller ID enable and disable
●
PIN maximum retry settings
●
Access-allowed caller list (no further authentication)
●
Caller PIN and associated dial plan
●
Least-cost routing (through outbound VoIP: Line1 dial plan
FXO control settings VoIP answer-delay timer
●
PSTN answer-delay timer
●
VoIP PIN digit timeout timer
●
PSTN PIN digit timeout timer
●
PSTN-to-VoIP call maximum-duration timer
●
VoIP-to PSTN call maximum-duration timer
●
PSTN ring-through delay timer
●
PSTN dialing delay timer
●
VoIP DLG (Dialog) refresh-interval timer
●
PSTN ring timeout timer
PSTN Disconnection Detection
●
CPC (Calling Party Control) (removal of tip and ring voltage momentarily)
●
Polarity reversal
●
Long silence (configurable time setting)
●
Disconnect tone (for example, reorder tone)
●
Silence threshold
International Control
●
FXO port impedance: Settings by country
●
Ring frequency: Configurable
●
SPA-to-PSTN and PSTN-to-SPA gain settings
●
Ring frequency: Maximum setting
●
Ring validation time setting
●
Tip and ring voltage adjustment setting
●
Ring indication delay setting
●
Ring timeout setting
●
Ring threshold
●
Line-in-use voltage setting
Security Password-protected system reset to factory default
Password-protected administrator and user access authority
Provisioning, configuration, and authentication
Secure HTTP (HTTPS) with factory-installed client certificate
HTTP digest: Encrypted authentication with (MD5; RFC 1321)
Up to 256-bit Advanced Encryption Standard (AES) encryption
SIP Transport Layer Security (TLS)
Reset button bypass (provisionable)