Technical information

25
Appendix 1:
Port Forwarding Setting for Motorola SBG 1000
Cable Modem Gateway
Congure“PortForwarding”fortheMotorolaSBG1000cablemodemgatewayonPort5060/5061and
16384-32767
Please ensure that the firewall policy on the integrated cable router allows the Ports specified above.
In the menu on the left hand side of your screen, click the button. This will open a new menu at the
top of your screen. In this new menu, click the button.
Close to the top of the status area, you should see a option. Click .
Use the Template drop down box to select . Enter the name of the program you are forwarding
ports for into the box.
To forward a range of ports, e.g. UDP ports 5060,5061, 16384 -32767, enter the lowest port number in the
range into the box. Enter the highest port number in the range into the box.
Enter the IP address to forward these ports to into the box. This should be the IP address of
the IAD (Linksys SPA2102-R3 Integrated Access Device) you are forwarding ports for. Check checkbox
to enable your configuration.