Specifications

4-9
Linksys SPA Provisioning Guide
Version 3.01
Chapter 4 Provisioning Field Reference
Internal Error Codes
Internal Error Codes
The SPA defines a number of internal error codes (X00–X99) to facilitate configuration in providing
finer control over the behavior of the unit under certain error conditions. They can be viewed in
Table 4-5.
PORT Request target UDP/TCP port, as obtained after
parsing resync or upgrade URL.
PATH Request target file path, as obtained after parsing
resync or upgrade URL.
ERR Result message of resync or upgrade attempt.
Only useful in generating result syslog messages.
The value is preserved in the UPGERR variable
in the case of upgrade attempts.
UID1 The contents of the Line 1 User_ID configuration
parameter (Firmware 2.0.11 and above).
UID2 The contents of the Line 2 User_ID configuration
parameter (Firmware 2.0.11 and above).
ISCUST Value=1 if unit is customized, 0 otherwise;
customization status viewable on WebUI Info
page.
Table 4-4 Macro Expansion Variables (continued)
Macro Name Macro Expansion
Table 4-5 Error Code Definitions
Error Code Description
X00 Transport layer (or ICMP) error when sending a SIP request.
X20 SIP request times out while waiting for a response.
X40 General SIP protocol error (for example, unacceptable codec in SDP in 200
and ACK messages, or times out while waiting for ACK).
X60 Dialed number invalid according to given dial plan.