Specifications

4-4
Linksys SPA Provisioning Guide
Version 3.01
Chapter 4 Provisioning Field Reference
Configuration Profile Parameters
Profile_Rule_B
Profile_Rule_C
Profile_Rule_D
Defines second, third, and fourth resync
commands and associated profile URLs. These
profile scripts are executed sequentially after the
primary Profile Rule resync operation has
completed. If a resync is triggered and Profile
Rule is blank, Profile Rule B, C, and D are still
evaluated and executed.
The default is (empty).
Log_Resync_Request_Msg This parameter contains the message that is sent
to the Syslog server at the start of a resync
attempt.
The default is $PN $MAC – Requesting resync
$SCHEME://$SERVIP:$PORT$PATH.
Log_Resync_Success_Msg Syslog message issued upon successful
completion of a resync attempt.
The default is $PN $MAC – Successful resync
$SCHEME://$SERVIP:$PORT$PATH -- $ERR.
Log_Resync_Failure_Msg Syslog message issued after a failed resync
attempt.
The default is $PN $MAC – Resync failed:
$ERR.
Report_Rule The target URL to which configuration reports
are sent. This parameter has the same syntax as
the Profile_Rule parameter, and resolves to a
TCP/IP command with an associated URL.
A configuration report is generated in response to
an authenticated SIP NOTIFY message, with
Event: report. The report is an XML file
containing the name and value of all the device
parameters.
This parameter may optionally contain an
encryption key.
For example:
[ --key $K ]
tftp://ps.callhome.net/$MA/rep.xml.enc
The default is (empty).
Table 4-1 Configuration Profile Parameters (continued)
Parameter Name Description and Default Value