Specifications

5-9
Linksys IP Phone Administrator Guide
Document Version 3.2
Chapter 5 Linksys ATA Field Reference
System Tab
Optional Network Configuration (PAP2T)
Gateway The default gateway used by Linksys IP phone when DHCP is disabled.
The default is 0.0.0.0.
Field Description
Field Description
Host Name The host name of the Linksys IP phone.
Domain The network domain of the Linksys IP phone.
Primary DNS DNS server used by Linksys IP phone in addition to DHCP supplied DNS servers if
DHCP is enabled; when DHCP is disabled, this is the primary DNS server.
The default is 0.0.0.0.
Secondary DNS DNS server used by Linksys IP phone in addition to DHCP supplied DNS servers if
DHCP is enabled; when DHCP is disabled, this is the secondary DNS server.
The default is 0.0.0.0.
DNS Server Order Specifies the method for selecting the DNS server. The options are Manual,
Manual/DHCP, and DHCP/Manual.
DNS Query Mode Do parallel or sequential DNS Query. With parallel DNS query mode, the Linksys IP
phone sends the same request to all the DNS servers at the same time when doing a DNS
lookup, the first incoming reply is accepted by the Linksys IP phone.
The default is parallel.
Syslog Server Specify the syslog server name and port. This feature specifies the server for logging
Linksys IP phone system information and critical events. If both Debug Server and Syslog
Server are specified, Syslog messages are also logged to the Debug Server.
Debug Server The debug server name and port. This feature specifies the server for logging Linksys IP
phone debug information. The level of detailed output depends on the debug level
parameter setting.
Debug Level The higher the debug level, the more debug information is generated. Zero (0) means no
debug information is generated. To log SIP messages, Debug Level must be set to at least
2.
The default is 0.
Primary NTP Server IP address or name of primary NTP server.
Secondary NTP Server IP address or name of secondary NTP server.