Specifications

5-8
Linksys IP Phone Administrator Guide
Document Version 3.2
Chapter 5 Linksys ATA Field Reference
System Tab
System Tab
This section describes the fields for the following headings on the System tab:
• System Configuration, page 5-8
• Internet Connection Type (PAP2T), page 5-8
• Optional Network Configuration (PAP2T), page 5-9
• Miscellaneous Settings (Not in PAP2T), page 5-10
System Configuration
Internet Connection Type (PAP2T)
Field Description
Restricted Access Domains This feature is used when implementing software customization.
Enable Web Server Enable/disable web server of Linksys IP phone
This feature should only be used on firmware version 1.0.9 or later.
The default is yes.
Web Server Port Port number of the Linksys IP phone administration web server.
The default is 80.
Enable Web Admin Access Lets you enable or disable local access to the administration web server. Select yes or no
from the drop-down menu.
The default is yes.
Admin Passwd Password for the administrator.
The default is no password.
User Password Password for the user.
The default is no password.
Field Description
DHCP Enable or disable DHCP.
The default is yes.
Static IP Static IP address of Linksys IP phone, which takes effect if DHCP is disabled.
The default is 0.0.0.0.
NetMask The NetMask used by Linksys IP phone when DHCP is disabled.
The default is 255.255.255.0.