Specifications

5-4
Linksys IP Phone Administrator Guide
Document Version 3.2
Chapter 5 Linksys ATA Field Reference
Info Tab
Message Waiting Indicates whether you have new voicemail waiting: Yes or No. This is updated when
voicemail notification is received. You can also manually modify it to clear or set the flag.
Setting this value to Yes can activate stutter tone and VMWI signal. This parameter is
stored in long term memory and survives after reboot or power cycle.
Call Back Active Indicates whether a call back request is in progress: Yes or No.
Last Called Number Last number called.
Last Caller Number Number of the last caller.
Mapped SIP Port Port number of the SIP port mapped by NAT.
Call 1/2 State Status of the call.
Call 1/2 Tone Type of tone used by the call.
Call 1/2 Encoder Codec used for encoding.
Call 1/2 Decoder Codec used for decoding.
Call 1/2 FAX Status of the fax pass-through mode.
Call 1/2 Type Direction of the call.
Call 1/2 Remote Hold Indicates whether the far end has placed the call on hold.
Call 1/2 Callback Indicates whether the call was triggered by a call back request.
Call 1/2 Peer Name Name of the internal phone.
Call 1/2 Peer Phone Phone number of the internal phone.
Call 1/2 Duration Duration of the call.
Call 1/2 Packets Sent Number of packets sent.
Call 1/2 Packets Recv Number of packets received.
Call 1/2 Bytes Sent Number of bytes sent.
Call 1/2 Bytes Recv Number of bytes received.
Call 1/2 Decode Latency Number of milliseconds for decoder latency.
Call 1/2 Jitter Number of milliseconds for receiver jitter.
Call 1/2 Round Trip Delay Number of milliseconds for delay.
Call 1/2 Packets Lost Number of packets lost.
Call 1/2 Packet Error Number of invalid packets received.
Call 1/2 Mapped RTP Port The port mapped for Real Time Protocol traffic for Call 1/2.