Specifications

3-15
Linksys ATA Administrator Guide
Document Version 3.1
Chapter 3 Configuring Linksys ATAs
Using a FAX Machine with the SPA2102 or SPA8000
SAS Enable[1] = no
MOH Server [1] = 1002@192.168.2.100:5061 or 1002@127.0.0.1:5061
SAS Enable[2] = yes
On Linksys ATA 2:
SAS Enable[1] = no
MOH Server [1] = 1002@192.168.2.100:5061
SAS Enable[2] = no
MOH Server [2] = 1002@192.168.2.100:5061
Configuring the Streaming Audio Server
The following provides step-by-step procedures for implementing an SAS with an external music
source.
Step 1 Connect an RJ-11 adapter between the music source and an FXS port on the Linksys ATA (Phone 1 or
Phone 2).
Step 2 On the administration web server, click the SIP tab and scroll down to the Streaming Audio Server
section (see Figure 1-16).
Figure 1-16 Enabling the Streaming Audio Server
Step 3
On the SAS Enable pull-down selection list, select yes.
Step 4 In the MOH Server field of the Call Feature Settings section, enter the User ID configured for the line
attached to the audio source.
If the line is not registered with the SIP proxy, enter the IP address and SIP port number configured for
the line.
Step 5 Click Submit All Changes.
Using a FAX Machine with the SPA2102 or SPA8000
Note T.38 Fax is only supported on the SPA2102 and the SPA8000. The SPA2102 supports a single
connection, whilethe SPA8000 supports one connection for each pair of ports (1/2, 3/4, 5/6, and 7/8) for
a maximum of four connections.
Procedure
To optimize fax completion rates, complete the following steps: